Skip to content

LukyDeluxe Audio Lab

WowCassette

A free lo-fi effect with an Age macro for wow, flutter, saturation, noise and dropouts. MIDI notes restart the wow phase, so the wobble begins on the beat instead of anywhere. Version 1.1 adds irregular wobble, a low-end head bump and 64 presets.

WowCassette · Plugin interface
Enlarge screenshot ↗

How it works

WowCassette runs the signal through a modulated delay. Set Wow depth and Flutter directly in cents; Wow rate runs freely or follows the host tempo via Sync. Wobble lets the speed and size of the wow drift slowly without exceeding the set depth. Soft saturation, tape hiss, short dropouts, Low cut, High cut, an adjustable head bump between 40 and 200 Hz and a slow stereo drift complete the chain. Age adds a matched amount of everything on top, one control from clean transport to worn-out tape.

MIDI restart resets the wow phase on every incoming note. The wobble then starts on the beat, with a 25 ms crossfade so the jump does not click. Note dip pulls the pitch down by up to 200 cents per note; Dip time (20–300 ms) sets how fast. Key low and Key high limit which notes react. The pitch trace shows the deviation of the last four seconds, joined by an output spectrum behind the tone curve and a dropout history. 23 parameters and 64 presets, from drums to MIDI effects.

Features

  • Age macro for wow, flutter, saturation, hiss, dropouts, bandwidth and drift
  • Wow up to 40 cents with Wobble, flutter up to 15 cents, sync from 1/8 to 4 bars
  • MIDI restart, Note dip up to 200 cents with Dip time and key range
  • Head bump up to 8 dB, spectrum, 23 parameters, 64 presets

Ways to use it

  • Beat-tape character for keys and samples in lo-fi hip-hop
  • Slow-down effects only on low synth hits in trap or pop
  • Restless tape drift on ambient pads and film textures

Try it

  1. Load Lo-Fi Beat Tape on a keys track and slowly raise Age; Wobble makes the drift less regular.
  2. Switch to Note-Locked Wobble and route a MIDI track with notes on the beat to the plugin: the wobble restarts on every note. Use Key low and Key high to choose which notes count.
  3. Raise Note dip and Dip time for slow-down effects and shape the sound with Head bump, Hiss and High cut.

Controls

Age macro for wow, wobble, flutter, saturation, hiss, dropouts, head bump and drift

Compatibility and notes

Free VST3 effect with a fixed latency of 25 ms, reported to the host and unchanged by every control. WowCassette does not model any specific device. MIDI only controls the wow phase and Note dip; Wow sync sets only the rate. At very slow rates (2 or 4 bars at low tempo) an 18 ms limit reduces the wow depth. Wobble stays below the set depth and is slightly shallower on average. Saturation runs without oversampling, and hiss keeps running during silence. The spectrum is a display, not a measuring instrument. Version 1.1.0 as VST3 for Windows x64, macOS Universal (arm64/x86_64) and Linux x86_64. The Mac edition is not notarized. No AU or standalone application. Checked with pluginval at strictness 10 on Windows, macOS and Linux, plus REAPER 7.86 smoke tests on macOS (Apple Silicon) and Linux. All parameters support DAW automation. Right-click opens the host-supplied parameter menu where the host supports this feature.

Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.

All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.

Install

  1. Choose the ZIP for your operating system and extract it.
  2. Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
  3. macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
  4. Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; checked with pluginval (including the real-time check) and in native test hosts under Xvfb. A test in a Linux DAW is still pending.
  5. Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Mac installation & security approval ↓
Download details
Windows x64 · VST3
LukyDeluxe-wowcassette-1.1.0-windows-x64-1b24fbca45f2.zip
ZIP size
0.52 MiB
SHA-256
1b24fbca45f257e290e5f47ade908a1567a8d0779371536b992377c4d8a27825
macOS Universal · VST3
LukyDeluxe-wowcassette-1.1.0-macos-universal-f6aa491aed90.zip
ZIP size
0.51 MiB
SHA-256
f6aa491aed9020a2e0db0fde15ec17ac62ff30347c561b08b884cfec3441e96a
Linux x86_64 · VST3
LukyDeluxe-wowcassette-1.1.0-linux-x86_64-90c1765c8f78.zip
ZIP size
0.34 MiB
SHA-256
90c1765c8f7899a71a28c1ea982cd7b778f5434b39b118fa2773771647a8ea0b
← All plugins

Mac installation, step by step

The Mac edition of WowCassette is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.

1. Extract the ZIP and open the installer

  1. Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
  2. In the extracted Installer folder, open wowcassette.pkg for WowCassette. Do not launch the .vst3 as an app.
  3. If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
  4. In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
  5. Restart your DAW, rescan its VST3 plugins and load WowCassette there. Instruments use a MIDI track; effects use an audio insert.

Installation destination for your Mac user account

~/Library/Audio/Plug-Ins/VST3/

2. If macOS blocks the installer

Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.

  1. First try to open wowcassette.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
  2. Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
  3. If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
  4. Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.

No matching entry, or a different warning?

If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.

Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.

Apple’s guidance for safely opening downloaded software ↗

LUKY.MUSIC

Search luky.music

Site results appear as you type. Submit a question for an Answely answer with sources; Answely receives it after your consent.

On this website

Start typing to search the website.