LukyDeluxe Audio Lab
ThumpKit
A synthesized six-voice drum kit for EDM and pop. Key lock tunes the kick body and sub to the root of your song; kick duck, room and per-voice pan mix the kit right inside the plugin.
How it works
ThumpKit generates kick, snare, clap, closed hat, open hat and perc without samples. The note map repeats in every octave: C plays the kick, D the snare, D# the clap, F# and A# the hats. Set Key to the key of your song. With Key lock on, the kick falls exactly onto the root after its punch sweep; Octave picks Auto, Low or High. In testing, the tail landed at 0.00 cents deviation in all 60 checked cases.
Every voice has its own tune or pitch, decay and tone controls and, since version 1.1.0, its own pan. The kick adds Punch, Click, Drive and a phase-aligned sub with its own length; Sub oct. can move it one octave lower. The closed hat chokes the open hat. Humanize varies level and tuning per hit, Variation also varies decay and tone; a locked kick stays in key.
On the MIX + FX page, Kick duck ducks all other voices after each kick, and Duck time sets the recovery between 30 and 600 ms. Room gives every voice except the kick a compact stereo room, Crush reduces sample rate and bit depth on the bus, and Glue ties everything together with bus compression and gentle saturation. A live spectrum marks the root and sub. 52 parameters and 69 presets cover house, techno, trap, hip-hop, drum and bass, UK garage, lo-fi, ambient and more.
Features
- Six voices: kick, snare, clap, closed hat, open hat and perc, each with pan
- Key lock: kick and sub end exactly on the root, C to B
- Kick with up to 48 semitones of punch, click, drive, a sub up to 4 s and a sub octave
- Kick duck, Room, Crush, Glue, Humanize and Variation
- 52 automatable parameters and 69 presets
Ways to use it
- Trap kick with a long sub tuned to the bassline
- House kick that stays clear of the bass in the drop
- Roomy hats and snare that briefly duck after each dry kick
- Wide future bass clap with Width and Spread
Try it
- Load Trap Sub Boom and play a kick on C against your bassline.
- Set Key to your song's key and leave Key lock on; the header shows the root in Hz.
- Lengthen Sub length, switch to MIX + FX and add Kick duck and some Room.
Controls
Six voices with key-locked kick, pan per voice, sub octave, kick duck, room, crush and glue
Compatibility and notes
Free VST3 instrument for a MIDI track, with no audio input and no latency. Pitch bend and note-off are ignored; all voices are one-shots. The kick chokes itself, and each voice type plays at most six hits at once. The hats use simple square oscillators and can alias slightly. Room does not affect the kick. Sub oct. only applies while the sub stays at or above 24 Hz. The key is not read from the host. Projects saved with version 1.0.0 sound unchanged; the new controls start in a neutral position. Version 1.1.0 as VST3 for Windows x64, macOS Universal (arm64/x86_64) and Linux x86_64. Checked with pluginval at strictness 10 on Windows, macOS and Linux, plus REAPER 7.86 smoke tests on macOS (Apple Silicon) and Linux. The Mac edition is not notarized. No AU or standalone application. All parameters support DAW automation. Right-click opens the host-supplied parameter menu where the host supports this feature.
Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.
All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.
Install
- Choose the ZIP for your operating system and extract it.
- Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
- macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
- Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; checked with pluginval (including the real-time check) and in native test hosts under Xvfb. A test in a Linux DAW is still pending.
- Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Download details
- Windows x64 · VST3
- LukyDeluxe-thumpkit-1.1.0-windows-x64-eede36c1e6b4.zip
- ZIP size
- 0.53 MiB
- SHA-256
- eede36c1e6b43e1148b64bf2b489b5013565de20fc98326b32b21a3d59adac87
- macOS Universal · VST3
- LukyDeluxe-thumpkit-1.1.0-macos-universal-8f3812dc7743.zip
- ZIP size
- 0.52 MiB
- SHA-256
- 8f3812dc7743c3cf7b48d8d934a534476c818e82ff06e1b57db26b1b43cd95e5
- Linux x86_64 · VST3
- LukyDeluxe-thumpkit-1.1.0-linux-x86_64-2624a699cc5d.zip
- ZIP size
- 0.35 MiB
- SHA-256
- 2624a699cc5daac3b29152d81469c9a2411fcf44f5095632f06a0a68efadeebb
Mac installation, step by step
The Mac edition of ThumpKit is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.
1. Extract the ZIP and open the installer
- Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
- In the extracted Installer folder, open thumpkit.pkg for ThumpKit. Do not launch the .vst3 as an app.
- If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
- In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
- Restart your DAW, rescan its VST3 plugins and load ThumpKit there. Instruments use a MIDI track; effects use an audio insert.
Installation destination for your Mac user account
~/Library/Audio/Plug-Ins/VST3/
2. If macOS blocks the installer
Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.
- First try to open thumpkit.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
- Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
- If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
- Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.
No matching entry, or a different warning?
If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.
Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.
Apple’s guidance for safely opening downloaded software ↗