Skip to content

LukyDeluxe Audio Lab

TameField

A dynamic resonance tamer with 20 bands. It cuts only frequencies that rise above their neighbourhood, and only while they do. Version 1.1 can focus detection on a range, separate ring-out from attack and listen to a sidechain.

TameField · Plugin interface
Enlarge screenshot ↗

How it works

TameField spreads 20 analysis bands logarithmically between Low and High. Each band compares its level with its spectral neighbourhood. When it rises more than Selectivity above it, a dynamic bell at the band centre cuts that excess, never deeper than Depth. Attack and Release set how fast the cut arrives and lets go. Sharpness sets the bell width between 1.2 and 0.15 octaves, Tilt spares the highs or the lows, Floor leaves quiet passages untouched, and Mode works linked, per channel, or on mid or side only.

New in 1.1: Focus makes a chosen range more sensitive or protects it. Target acts on everything, on the ring-out only or on attacks only, and Character goes from soft to hard. Lookahead (up to 5 ms) also catches fast peaks, and External lets another signal decide via the sidechain where to cut. The RESONANCE FIELD panel now shows the input and output spectrum, with a four-second waterfall of the reduction below. 22 parameters and 100 presets, grouped by use from vocals to podcast. Without lookahead latency stays at 0, and older projects sound unchanged.

Features

  • 20 dynamic bands, range set freely between 20 Hz and 20 kHz, up to 24 dB of cut
  • Focus, Target (All, Sustain, Transient) and Character from soft to hard
  • Lookahead up to 5 ms and external sidechain, plus Delta listen
  • Spectrum and reduction waterfall, 22 parameters, 100 presets

Ways to use it

  • Smooth harsh presence peaks between 2 and 9 kHz on a pop vocal
  • Tame only the ring of a snare while leaving the hit intact
  • Pull back a guitar bus where the vocal needs room, keyed by sidechain

Try it

  1. Load Vocal Harshness on a vocal track and play the loudest section.
  2. Turn on Delta listen to hear only what is removed. Adjust Selectivity until just the harsh peaks remain; use Focus gain to target or protect a range.
  3. Turn Delta listen off, set Depth and Character by ear and use Mix to blend some of the original back in.

Controls

20 dynamic bands, detection focus, sustain/transient target, lookahead and external sidechain

Compatibility and notes

TameField is not an EQ with a fixed target curve and has no solo for single bands. The 20 bands sit at fixed positions between Low and High: a resonance exactly between two band centres is cut less (8.2 dB at a Depth of 12 dB in testing). On noise-like material, Attack times below 2 ms cause more false cuts; very short clicks are only fully caught by transient detection with lookahead. Tilt slopes the sensitivity and is not an absolute target curve. External requires your host to route a signal into the sidechain input; otherwise TameField works internally. Lookahead adds the same latency, which is reported to the host; without lookahead it is 0 ms. The spectrum is a display, not a measuring instrument; the waterfall starts when the editor opens. Version 1.1.0 as VST3 for Windows x64, macOS Universal (arm64/x86_64) and Linux x86_64. The Mac edition is not notarized. No AU or standalone application. Checked with pluginval at strictness 10 on Windows, macOS and Linux, plus REAPER 7.86 smoke tests on macOS (Apple Silicon) and Linux. All parameters support DAW automation. Right-click opens the host-supplied parameter menu where the host supports this feature.

Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.

All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.

Install

  1. Choose the ZIP for your operating system and extract it.
  2. Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
  3. macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
  4. Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; checked with pluginval (including the real-time check) and in native test hosts under Xvfb. A test in a Linux DAW is still pending.
  5. Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Mac installation & security approval ↓
Download details
Windows x64 · VST3
LukyDeluxe-tamefield-1.1.0-windows-x64-234cdb12516f.zip
ZIP size
0.53 MiB
SHA-256
234cdb12516f02806b44d84263a915d609710fd51108821abea9c43827ecb107
macOS Universal · VST3
LukyDeluxe-tamefield-1.1.0-macos-universal-fe78b20bb464.zip
ZIP size
0.51 MiB
SHA-256
fe78b20bb464195c0808f01ad7330d14c6c5b4082a17f27e6fd11baa4a42baaa
Linux x86_64 · VST3
LukyDeluxe-tamefield-1.1.0-linux-x86_64-55a8ec9bbc46.zip
ZIP size
0.34 MiB
SHA-256
55a8ec9bbc467a0f2a68e13f69ae55a126f3b7e3360ad94ada1c19db98145061
← All plugins

Mac installation, step by step

The Mac edition of TameField is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.

1. Extract the ZIP and open the installer

  1. Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
  2. In the extracted Installer folder, open tamefield.pkg for TameField. Do not launch the .vst3 as an app.
  3. If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
  4. In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
  5. Restart your DAW, rescan its VST3 plugins and load TameField there. Instruments use a MIDI track; effects use an audio insert.

Installation destination for your Mac user account

~/Library/Audio/Plug-Ins/VST3/

2. If macOS blocks the installer

Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.

  1. First try to open tamefield.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
  2. Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
  3. If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
  4. Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.

No matching entry, or a different warning?

If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.

Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.

Apple’s guidance for safely opening downloaded software ↗

LUKY.MUSIC

Search luky.music

Site results appear as you type. Submit a question for an Answely answer with sources; Answely receives it after your consent.

On this website

Start typing to search the website.