LukyDeluxe Audio Lab
PocketPump
A free gain shaper with tempo or MIDI triggering, adjustable recovery and bass protection.
How it works
PocketPump lowers the level in repeating movements and brings it back along an adjustable curve. Make pads, basses and effect returns breathe rhythmically without configuring a separate kick as the control signal. The internal clock follows host tempo or runs freely; MIDI notes can trigger the envelope instead, optionally with velocity-dependent depth.
Dip Attack and Hold shape the start and duration of the dip. Recovery and Recovery Curve determine how the sound returns, while Gain Floor limits attenuation. Bass Protection can leave a portion of the low frequencies less attenuated. Swing, Clock Phase and Stereo Phase shift the groove; Mix and Soft Ceiling provide additional shaping. Four presets offer useful starting points. The pump-curve preview sits between large Depth and Recovery dials. All 22 parameters are available in one overview, framed by green gradients and the Rhythm Machine mark. The curve represents parameter settings.
Features
- Tempo-synchronized, free-running or MIDI-triggered gain dips
- Dip Attack, Hold, Recovery and Recovery Curve
- Gain Floor and adjustable bass protection with its own crossover
- Swing, Clock Phase and Stereo Phase
- MIDI Retrigger and Velocity Depth
- Mix, Output, Soft Ceiling and four factory presets
- The pump-curve preview sits between large Depth and Recovery dials. All 22 parameters are available in one overview, framed by green gradients and the Rhythm Machine mark. The curve represents parameter settings.
Ways to use it
- Pumping pads, basses and synth groups
- Moving effect returns to a defined rhythm
- MIDI-controlled accents and offset stereo movement
Try it
- Insert PocketPump on the target track and begin with Pocket quarter.
- Choose a Rate Division with Sync enabled, or select MIDI as the trigger source.
- Shape Depth, Dip Attack, Hold and Recovery around the kick and groove.
- Set Bass Protection and Gain Floor, then compare using Mix and matched Output.
Controls
22 parameters · rate/division · clock/stereo phase · swing · MIDI retrigger · envelope · depth · tone · mix
Compatibility and notes
PocketPump has no external audio-sidechain input. MIDI provides triggers; bass protection uses a simple frequency contribution rather than a phase-linear crossover. Soft Ceiling is a colour control, not a guaranteed mastering limiter. Active envelopes and phase restart when a project is loaded. Early Access by LukyDeluxe Audio Lab, version 0.2.0 as VST3 for Windows x64 and macOS Universal (arm64/x86_64). The Mac edition is not notarized. No AU or standalone application. Broad DAW, GUI and long-session compatibility is still being developed. All sound parameters support DAW automation. Right-click opens the host-supplied parameter menu where the host supports this feature.
Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.
All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.
Install
- Choose the ZIP for your operating system and extract it.
- Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
- macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
- Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland and a compatible host. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; exact library requirements are in INSTALL.txt in the Linux ZIP. Checked in native test hosts/Xvfb and pluginval; not yet tested in a Linux DAW. Not every Linux host or distribution has been tested.
- Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Download details
- Windows x64 · VST3
- LukyDeluxe-pocketpump-0.2.0-windows-x64-c8f79067cae8.zip
- ZIP size
- 0.34 MiB
- SHA-256
- c8f79067cae8ecc57c1010f1690572b2d8a09914e738376de08ecf71d5230ed4
- macOS Universal · VST3
- LukyDeluxe-pocketpump-0.2.0-macos-universal-e4a7b6900179.zip
- ZIP size
- 0.18 MiB
- SHA-256
- e4a7b69001799f9b4519ecbe9247eb6f952e2ebcb147853228272a7ee1afd3b9
- Linux x86_64 · VST3
- LukyDeluxe-pocketpump-0.2.0-linux-x86_64-63185d6620f8.zip
- ZIP size
- 0.12 MiB
- SHA-256
- 63185d6620f8cda9d32a4b83331877869895e86b6871bd9866a84d7a0a46a181
Mac installation, step by step
The Mac edition of PocketPump is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.
1. Extract the ZIP and open the installer
- Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
- In the extracted Installer folder, open pocketpump.pkg for PocketPump. Do not launch the .vst3 as an app.
- If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
- In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
- Restart your DAW, rescan its VST3 plugins and load PocketPump there. Instruments use a MIDI track; effects use an audio insert.
Installation destination for your Mac user account
~/Library/Audio/Plug-Ins/VST3/
2. If macOS blocks the installer
Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.
- First try to open pocketpump.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
- Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
- If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
- Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.
No matching entry, or a different warning?
If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.
Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.
Apple’s guidance for safely opening downloaded software ↗