LukyDeluxe Audio Lab
Luky SuperSaw
A synth for detuned saw stacks: up to 16 sawtooth waves per note, with detune, stereo placement, phase and drift shaped individually. The saw bubble shows live what is sounding.
How it works
Luky SuperSaw builds every note from 1 to 16 sawtooth waves. Detune sets the amount, and the detune curve spreads it linearly, exponentially or along its own asymmetric Classic curve. Side mix balances the centre saw against the outer ones, Spread places them in the stereo field, Phase starts them free, random or reset, and Drift lets them wander apart slowly. Shape morphs from a plain saw to a brighter and a softer wave. A sub oscillator (sine or square, one or two octaves down) and noise complete the source.
Next comes a per-note stereo filter with low-pass, high-pass and band-pass at 12 or 24 dB, key tracking and its own envelope, plus an amp envelope, a tempo-syncable LFO aimed at pitch, detune, cutoff or spread, and an assignable mod wheel. Poly, Mono and Legato with glide cover chords, leads and basses. The saw bubble draws every saw of the latest note as a ring: size follows detune, rotation follows phase, offset follows stereo position. 38 parameters and six presets range from Lead: First Rise to Wall: Wide Unison.
Features
- 1–16 saws per note, three detune curves, side mix and spread
- Free, random or reset phase, drift and shape morph
- Sub, noise, LP/HP/BP 12/24 dB filter with envelope and key tracking
- Tempo-sync LFO, poly/mono/legato with glide, 38 parameters, six presets
Ways to use it
- Wide lead for a trance or pop chorus
- Chord pad that opens slowly in a breakdown
- Thick unison bass with sub under a club beat
Try it
- Load Wall: Wide Unison and play a chord.
- Raise Saws and Detune and watch the rings in the saw bubble grow and rotate apart.
- Set the detune curve to Classic, lower Side mix and open the cutoff with the filter envelope.
Controls
38 parameters · 6 presets · 1–16 saws per note · detune curve · side mix · spread · phase · drift · shape · sub/noise · filter + envelopes · LFO · mono/legato/glide · saw bubble
Compatibility and notes
Free VST3 instrument for a MIDI track, latency 0. Up to 16 notes at once; beyond that a new note takes over a voice with a short fade. 16 saws per note at full polyphony put a noticeable load on the CPU. Alias suppression adds an internal delay of 2 samples (0.04 ms at 48 kHz) that is not reported as latency. Changing Saws while notes are held jumps audibly. Original design that does not emulate any specific unit. Pitch bend, mod wheel (CC 1) and sustain pedal (CC 64) are supported. All presets also load unchanged in Luky SuperSaw PRO. Version 1.0.0 as VST3 for Windows x64, macOS Universal (arm64/x86_64) and Linux x86_64. The Mac edition is not notarized. No AU and no standalone application. Checked with pluginval at strictness 10 on Windows, macOS and Linux, plus REAPER 7.86 smoke tests on macOS (Apple Silicon) and Linux. All parameters support DAW automation; right-click opens the host's parameter menu where the host supports it.
Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.
All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.
Install
- Choose the ZIP for your operating system and extract it.
- Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
- macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
- Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; checked with pluginval (including the real-time check) and in native test hosts under Xvfb. A test in a Linux DAW is still pending.
- Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Download details
- Windows x64 · VST3
- LukyDeluxe-luky-supersaw-1.0.0-windows-x64-1e66c2833b3e.zip
- ZIP size
- 0.56 MiB
- SHA-256
- 1e66c2833b3e4431a9e4d97d08bc49f96f896e4fb9baca220a300623aad96b4c
- macOS Universal · VST3
- LukyDeluxe-luky-supersaw-1.0.0-macos-universal-f15354d743df.zip
- ZIP size
- 0.57 MiB
- SHA-256
- f15354d743df7266f6a017f3c8d6d7b166a0aa21935c4eb030dd8311072f64e7
- Linux x86_64 · VST3
- LukyDeluxe-luky-supersaw-1.0.0-linux-x86_64-8e32557c8519.zip
- ZIP size
- 0.37 MiB
- SHA-256
- 8e32557c85191cbcf5d7fcfeed5605892537c6499db41c4aefeb091ea5a3aecc
Mac installation, step by step
The Mac edition of Luky SuperSaw is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.
1. Extract the ZIP and open the installer
- Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
- In the extracted Installer folder, open luky-supersaw.pkg for Luky SuperSaw. Do not launch the .vst3 as an app.
- If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
- In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
- Restart your DAW, rescan its VST3 plugins and load Luky SuperSaw there. Instruments use a MIDI track; effects use an audio insert.
Installation destination for your Mac user account
~/Library/Audio/Plug-Ins/VST3/
2. If macOS blocks the installer
Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.
- First try to open luky-supersaw.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
- Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
- If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
- Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.
No matching entry, or a different warning?
If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.
Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.
Apple’s guidance for safely opening downloaded software ↗