Skip to content

LukyDeluxe Audio Lab

ChordTail

A free effect that shapes existing reverb and delay tails around chords or held MIDI notes.

ChordTail · Plugin interface
Enlarge screenshot ↗

How it works

Long reverbs give pads, leads and vocals a sense of scale, but their harmony can linger after the chord changes. ChordTail shapes the spectrum of an existing effect tail: choose a root and chord, or send held MIDI notes to the plugin. The selected pitch classes are retained more strongly while Amount and Residual Floor determine how far other spectral components are reduced.

Place ChordTail on an effect return after a fully wet reverb or delay, with the dry source on its own channel. Transition smooths harmonic changes, Protect Lows excludes low frequencies from shaping, and Mix sets the blend. It gives you a practical way to fit atmospheric tails to an arrangement while keeping the character of the reverb you already use. A manual chord wheel, a large Amount dial and the wet-tail signal flow form a distinct composition with warm gradients. Root, Chord and all sound parameters remain directly accessible.

Features

  • Manual root selection and eight chord types, including Chromatic
  • Held MIDI notes define the harmony; the manual chord returns when no notes are held
  • Amount and Residual Floor balance selected tones against the remaining spectrum
  • 20–1,000 ms Transition for smoother chord changes
  • Protect Lows, Mix, Output and Bypass
  • One shared harmonic mask for both stereo channels
  • Native macOS editor with parameter automation and host context menus
  • A manual chord wheel, a large Amount dial and the wet-tail signal flow form a distinct composition with warm gradients. Root, Chord and all sound parameters remain directly accessible.

Ways to use it

  • Long pad and lead reverbs across chord changes
  • Harmonically dense vocal delays and effect returns
  • EDM breakdowns, ambient layers and controlled endings

Try it

  1. Insert ChordTail after a reverb or delay on an effect return, with the preceding effect set fully wet.
  2. Choose Root and Chord, or route your desired MIDI notes to ChordTail.
  3. Raise Amount gradually and use Residual Floor to retain some of the surrounding spectrum.
  4. Set Transition, Protect Lows and Mix, then compare at matched output level.

Controls

Root · Chord · Amount · Residual Floor · Transition · Protect Lows · Mix · Output

Compatibility and notes

ChordTail does not generate reverb or separate overlapping instruments or notes. STFT processing always adds 2,048 samples of latency, about 46.4 ms at 44.1 kHz, including internal bypass and Mix 0. Use your DAW's plugin delay compensation. Early Access by LukyDeluxe Audio Lab, version 0.2.0 as VST3 for Windows x64 and macOS Universal (arm64/x86_64). The Mac edition is not notarized. No AU or standalone application. Broad DAW, GUI and long-session compatibility is still being developed. All sound parameters support DAW automation. Right-click opens the host-supplied parameter menu where the host supports this feature.

Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.

All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.

Install

  1. Choose the ZIP for your operating system and extract it.
  2. Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
  3. macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
  4. Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland and a compatible host. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; exact library requirements are in INSTALL.txt in the Linux ZIP. Checked in native test hosts/Xvfb and pluginval; not yet tested in a Linux DAW. Not every Linux host or distribution has been tested.
  5. Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Mac installation & security approval ↓
Download details
Windows x64 · VST3
LukyDeluxe-chordtail-0.2.0-windows-x64-8803dfd7c176.zip
ZIP size
0.22 MiB
SHA-256
8803dfd7c176580c44cd6b83fdc2b3296310fea43bd4317b60c99214d91175c2
macOS Universal · VST3
LukyDeluxe-chordtail-0.2.0-macos-universal-21a1d07fb000.zip
ZIP size
0.10 MiB
SHA-256
21a1d07fb0007f5bea44012ab13fa2f2ee7947e28541d93b6437ec5f6f410c14
Linux x86_64 · VST3
LukyDeluxe-chordtail-0.2.0-linux-x86_64-2a3eb704e8d7.zip
ZIP size
0.09 MiB
SHA-256
2a3eb704e8d7df95f1a2ea1c2bad1ed9368dcf6e4a3e657ab549a49c03b22791
← All plugins

Mac installation, step by step

The Mac edition of ChordTail is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.

1. Extract the ZIP and open the installer

  1. Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
  2. In the extracted Installer folder, open chordtail.pkg for ChordTail. Do not launch the .vst3 as an app.
  3. If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
  4. In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
  5. Restart your DAW, rescan its VST3 plugins and load ChordTail there. Instruments use a MIDI track; effects use an audio insert.

Installation destination for your Mac user account

~/Library/Audio/Plug-Ins/VST3/

2. If macOS blocks the installer

Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.

  1. First try to open chordtail.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
  2. Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
  3. If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
  4. Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.

No matching entry, or a different warning?

If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.

Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.

Apple’s guidance for safely opening downloaded software ↗

LUKY.MUSIC

Search luky.music

Site results appear as you type. Submit a question for an Answely answer with sources; Answely receives it after your consent.

On this website

Start typing to search the website.