LukyDeluxe Audio Lab
ChoirStack
Up to four harmony voices on your lead vocal. ChoirStack puts the voices exactly on held MIDI notes or, since version 1.1, derives them from a key and scale, with no MIDI needed. The character of the voice is kept.
How it works
ChoirStack detects the pitch of a monophonic vocal or lead track and creates up to four new voices from it. In MIDI mode each voice sits exactly on a held note. In Scale mode you choose Key, Scale (seven scales from major to minor pentatonic) and an interval per voice, such as a third, fifth, sixth, octave or unison; the voices then follow the singer's intonation and vibrato. The formants are preserved, and Formant makes the voices up to 12 semitones darker or brighter. In 1.1 pitch detection checks the octave and no longer jumps an octave too high on vocals with vibrato.
Humanize, Spread, Glide up to 800 ms and Breath remain. New are pan and level per voice, vibrato for the voices, a doubler that adds a second, slightly detuned stream per voice, and a low/high cut for the choir only. Dry tune can also pull the lead itself gently or firmly to the nearest scale note. The editor shows the lead, the tuned lead and all four voices as traces, with pages for Harmony, Voices, Ensemble and Tone. 36 parameters and 100 presets, 79 of which work without MIDI.
Features
- Up to four voices: from MIDI, or from key, scale and interval without MIDI
- Formant preservation, Formant shift ±12 semitones, octave-safe pitch detection
- Per-voice pan and level, vibrato, doubler, wet filter and Dry tune
- Humanize, Glide up to 800 ms, 36 parameters, 100 presets
Ways to use it
- Thirds and fifths under the lead vocal in a pop chorus, without programming a note
- Wide, doubled backing vocals for a house drop from a single take
- A MIDI-played choir part for a gospel or film moment
Try it
- Insert ChoirStack on the vocal track, load Scale Major Wide Triad or another Scale preset and set Key and Scale to the song's key.
- Check on the TONE page that the sung note is recognised; otherwise adjust Range low and Range high.
- For fixed chords, set Source to MIDI, route a MIDI track to the plugin and play up to four notes; blend with Dry level.
Controls
Up to four harmony voices from held MIDI notes or a key and scale, per-voice pan/level, vibrato, doubler and dry tune
Compatibility and notes
VST3 effect for a monophonic track; in MIDI mode, how MIDI reaches the effect depends on your DAW. Latency is a fixed 40 ms and is reported to the host; it is noticeable when monitoring live. In MIDI mode the voices are hard-tuned to the notes; the singer's vibrato is only carried over in Scale mode. No pitch bend, no sustain pedal. Dry tune only corrects to scale notes and adds slight colouration on large corrections. A unison note can be phase-shifted against the original and comb-filter with the dry signal; very breathy or distorted voices can sound rough. Because of the improved pitch detection, older MIDI projects no longer sound bit-identical but cleaner; all values are kept. The measurements come from synthetic test signals. Version 1.1.0 as VST3 for Windows x64, macOS Universal (arm64/x86_64) and Linux x86_64. The Mac edition is not notarized. No AU or standalone application. Checked with pluginval at strictness 10 on Windows, macOS and Linux, plus REAPER 7.86 smoke tests on macOS (Apple Silicon) and Linux. All parameters support DAW automation. Right-click opens the host-supplied parameter menu where the host supports this feature.
Windows x64 and macOS Universal (Apple Silicon/Intel). The Mac edition is not notarized. Intel runtime testing is not documented; follow the host and installation notes for the individual download.
All sound knobs, switches and selection parameters support host automation. Right-click a parameter to open its menu where your DAW provides one.
Install
- Choose the ZIP for your operating system and extract it.
- Windows: copy the entire .vst3 bundle to C:\Program Files\Common Files\VST3.
- macOS: extract the ZIP and open the product .pkg in the Installer folder. Install for your current user. The Mac edition is not notarized; follow the Mac installation and security guide on this page.
- Linux x86_64: copy the complete .vst3 bundle from Plugin to ~/.vst3/ (create the directory if needed). The editor uses X11 via Cairo/XCB and requires a VST3 host with IRunLoop; Wayland requires XWayland. Native Wayland and Linux ARM64 are not supported. Built on Ubuntu 22.04; checked with pluginval (including the real-time check) and in native test hosts under Xvfb. A test in a Linux DAW is still pending.
- Rescan plugins in your 64-bit VST3 host. Load instruments on a MIDI track and effects in an audio insert.
Download details
- Windows x64 · VST3
- LukyDeluxe-choirstack-1.1.0-windows-x64-4597df93e695.zip
- ZIP size
- 0.53 MiB
- SHA-256
- 4597df93e6955a5ae260bc08eaf489035668a3fff6bbc49f7c79c94bba41dccb
- macOS Universal · VST3
- LukyDeluxe-choirstack-1.1.0-macos-universal-5faa956a0f6c.zip
- ZIP size
- 0.53 MiB
- SHA-256
- 5faa956a0f6cd90da1fe781f8ac172f31120f33ff47ad1b156cd30d154fc270a
- Linux x86_64 · VST3
- LukyDeluxe-choirstack-1.1.0-linux-x86_64-c6b4427f3cf2.zip
- ZIP size
- 0.35 MiB
- SHA-256
- c6b4427f3cf2844bd076ddd92b3173da9b3c88e76566e871a2222a02c26ae1ee
Mac installation, step by step
The Mac edition of ChoirStack is not notarized by Apple. Its ZIP contains an installer for this specific plugin. Load the installed VST3 in a 64-bit DAW that supports VST3; it is not a standalone app.
1. Extract the ZIP and open the installer
- Choose the macOS Universal ZIP. Quit your DAW and extract the complete ZIP in Finder.
- In the extracted Installer folder, open choirstack.pkg for ChoirStack. Do not launch the .vst3 as an app.
- If macOS blocks the installer because of an unidentified developer or missing Apple checks, follow section 2. Then reopen that same .pkg file.
- In Installer, choose installation for your current user account or home folder and finish the installation. The plugin destination is shown below.
- Restart your DAW, rescan its VST3 plugins and load ChoirStack there. Instruments use a MIDI track; effects use an audio insert.
Installation destination for your Mac user account
~/Library/Audio/Plug-Ins/VST3/
2. If macOS blocks the installer
Consider this exception only if you downloaded the file yourself from luky.music and trust that specific file. It applies to the product .pkg, not the .vst3 bundle.
- First try to open choirstack.pkg. Dismiss the unidentified-developer or missing-Apple-check alert, for example with Done; wording varies by macOS version.
- Open System Settings → Privacy & Security and scroll down to Security. Find the recently blocked entry with the actual filename of this product .pkg.
- If Open Anyway is offered for that exact installer, select it and confirm any further opening request. Approve any Mac password or Touch ID request yourself, only in the macOS system dialog.
- Reopen the same .pkg if Installer does not appear automatically. Install only for your current user. Then restart the DAW and rescan the plugin.
No matching entry, or a different warning?
If the entry for the recently blocked .pkg remains absent, contact our support or your IT administrator on a managed Mac. If approving the .vst3 bundle only opens Finder and the DAW remains blocked, the plugin has not been successfully approved; use the product installer. Do not use this procedure to dismiss warnings about malware or a damaged or modified file: stop installation and investigate. Filenames and checksums are listed under Download details.
Keep Gatekeeper enabled. This guide requires neither Terminal commands to remove quarantine nor blanket approval for other software.
Apple’s guidance for safely opening downloaded software ↗